
As temperatures begin to drop, preparing your site for winter should involve more than checking heating systems and outdoor facilities. Your perimeter security equipment also needs attention.
Automatic gates, security barriers and turnstiles are exposed to the elements throughout the year. Colder temperatures, heavy rainfall, frost and debris can all contribute to increased wear and tear, potentially affecting the reliability and performance of your equipment.
For commercial and industrial sites, a fault with access control equipment can cause unnecessary disruption, compromise site security and create safety concerns.
Carrying out some simple checks before winter arrives can help identify potential issues early, reduce the risk of unexpected breakdowns and keep your site operating as it should.
Here are five important checks to include in your pre-winter maintenance routine.
1. Inspect Moving Parts and Mechanical Components
Cold and wet weather can put additional strain on the moving components of automatic gates, barriers and turnstiles.
Over time, hinges, bearings, chains, rollers and other mechanical parts can experience wear and tear. If components are already showing signs of deterioration, winter conditions may make existing problems more noticeable.
Before temperatures drop, arrange for the mechanical components of your equipment to be inspected by a competent engineer.
Checks should include:
- Inspecting hinges, rollers, bearings and other moving components for signs of wear.
- Checking gates and barriers move smoothly without unusual noise or resistance.
- Looking for signs of corrosion, damage or deterioration.
- Checking that turnstile mechanisms operate correctly.
Identifying worn or damaged components early can help prevent minor issues from developing into more significant equipment failures.
2. Check Electrical Systems and Controls
Automatic gates, rising arm barriers and turnstiles rely on electrical systems and control equipment to operate safely and reliably.
Moisture, condensation and changes in temperature can affect electrical components, particularly where equipment is exposed to the elements.
Before winter, it is worth arranging an inspection of the electrical systems and controls associated with your perimeter security equipment.
This should include:
- Inspecting external control panels and enclosures for damage.
- Checking seals and protective covers are secure.
- Looking for signs of water ingress or corrosion.
- Checking sensors, access control systems and safety devices are functioning correctly.
- Ensuring all controls respond as expected during operation.
Any electrical faults or signs of water ingress should be investigated by a suitably qualified engineer rather than left until the equipment stops working.
3. Clear Debris and Check Drainage Around Equipment
Heavy rainfall, fallen leaves, mud and standing water can all create problems for outdoor security equipment.
Sliding gates, in particular, rely on clear running tracks to operate correctly. Leaves, dirt and other debris can build up within the track, restricting movement and placing additional strain on the mechanism.
Similarly, standing water around gate motors, barrier foundations and other equipment can increase the risk of corrosion and water-related damage.
Before winter sets in, check that:
- Sliding gate tracks are clear of leaves, mud and other obstructions.
- Drainage channels are free from debris.
- There is no standing water around equipment foundations.
- External equipment housings are free from visible damage.
- The surrounding operating area is clear and safe.
Keeping the area around your equipment clean and free from obstructions is a simple but important part of preventative maintenance.
4. Test Safety Devices and Operational Performance
Safety should always be a priority when maintaining automated perimeter security equipment.
Automatic gates, barriers and turnstiles need to operate correctly to protect both pedestrians and vehicles using your site.
Safety devices such as photocells, safety edges, sensors and emergency stop systems should be inspected and tested by a competent engineer in accordance with the equipment manufacturer’s instructions and relevant safety requirements.
Your pre-winter checks should consider:
- Whether safety sensors and detection systems are operating correctly.
- Whether emergency stop functions are working as intended.
- Whether gates and barriers respond correctly to their control systems.
- Whether turnstiles allow controlled pedestrian access without unexpected interruptions.
- Whether any unusual noises, delays or inconsistent movements have developed.
If a safety device is faulty or equipment is behaving unexpectedly, it should be taken out of service where necessary and assessed by a competent engineer.
Never overlook unusual operating behaviour. A small fault today could become a more serious issue during periods of increased use or adverse weather.
5. Arrange Professional Servicing Before Winter
Perhaps the most important step is making sure your equipment has received the appropriate professional maintenance before winter arrives.
While routine visual checks can help identify obvious problems, they are not a substitute for a planned preventative maintenance programme.
A professional service allows engineers to inspect the condition of your equipment, identify components showing signs of wear and address potential faults before they result in unexpected downtime.
Depending on your equipment and site requirements, servicing may include:
- Mechanical and electrical inspections.
- Testing operational and safety systems.
- Checking and adjusting components in line with manufacturer guidance.
- Identifying parts that may require replacement.
- Reviewing the overall condition and reliability of your equipment.
A planned maintenance approach can help reduce the likelihood of unexpected breakdowns, support site security and give you greater confidence that your equipment is ready for the colder months.
Is Your Perimeter Security Equipment Ready for Winter?
Your gates, barriers and turnstiles play an important role in controlling access, protecting your premises and keeping your site operating safely.
Leaving maintenance until something goes wrong can result in unnecessary disruption, unexpected repair costs and potential security concerns.
By carrying out these five checks and arranging professional servicing where required, you can help prepare your perimeter security equipment for the challenges of winter.
At Security Solutions, we provide professional service, maintenance and repair support for commercial and industrial security equipment across the UK.
From automatic gates and rising arm barriers to turnstiles, our experienced engineers can help keep your equipment operating safely and reliably throughout the year.
Whether you require planned preventative maintenance, a one-off service or assistance with an existing fault, our team is here to help.
Don’t wait for a winter breakdown. Get your equipment checked before the cold sets in.
Contact Security Solutions on 0843 290 9250 or email sales@securitysolutionsgb.com to discuss your service and maintenance requirements.